MC-51 wet wipes is a revolutionary product. It is the first product of this kind in the market. Our wet wipes impregnated with MC-51 spray are easy and handy to use. You can just wipe off light to medium rust. MC-51 wet wipes have the same properties with MC-51 rust remover and will remove rust and most types of oxidation to bare metal.
Got Rust?
Just grab a wipe from the tub
and wipe off the rust.
It is so simple....
Mc-51 is Safe and ECO friendly:
No special protection is required during the use of MC-51. MC-51 meets EU requirements for the Detergents Directive on Biodegradability EC648/2004.
Convenient for everyday use:
Whether you are a professional or a home user, MC-51 wet wipes can make your life easier when it comes to every day rust removal needs. Just grab a wipe from the tub and wipe off the rust. MC-51 Wipes are ideal for:
How to use MC-51 Wet wipes:
Apply wipe to the rusted area using circular motions until the surface is wet and all rust is removed. The effect on the rust is immediate. Continue to wipe until the rusted area is clean. Depending on the level of rust, you may need to repeat the application with a new wipe. After use, dispose of the wipes in accordance with local regulations. MC-51 is a biodegradable product.
High strength XL size wet wipes:
MC-51 wet wipes are produced in the UK with industrial grade materials, and will withstand heavy scrubbing even on rough surfaces without any problem. Each wipe size is 200x200mm. MC-51 wet wipes are available in 80 wipe Tabs.
Gallery
Our Clients Say
Frequently asked questions:
Q A What is the best way to apply MC-51?
MC-51 is designed to bring the rust removal applications to the actual job site. An end user can choose the application method that best meets his needs. MC-51 can be applied by spraying, soaking, or wiping at the job site. There is also a Gel that can be easily applied to vertical surfaces. This approach is distinctly different from other liquid rust removers, which require a user to bring the rusted items to a soaking tank. This creates an inconvenience, disrupts the workflow, takes a longer time, and adds to the labor cost.
Q A Is MC-51 safe to use?
All of the MC-51 products are safe to use, and they are fully compliant with the European Union requirements for the Detergents Directive on Biodegradability EC648/2004. The products contain no solvents, no VOC’s, and no hazardous or toxic ingredients. The products are biodegradable and environmentally friendly. As with any chemical product, people with skin sensitivities should use gloves and goggles during use.
Q A What is the active life of MC-51?
MC-51 has a minimum shelf life of 5 years.
Q A Is MC-51 safe to transport?
MC-51 is completely safe to transport by ground, ocean, or air freight. MC-51 is non-hazardous and non-toxic, and can be shipped by postal delivery, courier delivery, or carrier freight (Shipping Class 55).
Q A Does MC-51 work under heavy rusting conditions?
MC-51 is an excellent product for removing heavy rusting. In particular, the Soak will remove heavy rust quickly with no manual effort. For items too big to soak, the Spray is a very good alternative for removing heavy rust at the job site. Heavy rust is defined as rust that is 5mm or deeper.
Q A After using MC-51, is any further treatment required?
No further treatment is required once the rust has been removed with MC-51. With the Soak, we recommend rinsing the metal right after it is pulled from the bath. Tiny molecules of iron will be held in suspension in the MC-51 solution, and these molecules should be rinsed off with water or they will cause a re-rusting of the metal. Based on test results, MC-51 keeps rust from re-forming on the metal for up to 3 months. This is much longer than other rust removers. Bare metal will always have a tendency to rust, so a rust inhibitive product should be used to keep the rust from forming.
Q A What is the ideal temperature for MC-51 to work most efficiently?
MC-51 works well above 10° C (50° F). The higher the temperature, the faster the products will work.
Q A Is there any harm to the metal after treatment with MC-51?
There will be no harm to the metal with the Spray, Wet Wipes, or Gel. Items should be removed from the Soak when the part is cleaned to prevent etching to the metal. The Soak works very fast and most rust will be removed with 5-30 minutes.
Q A How do I dispose of the spent solution?
The product can be disposed of in the local sewer system in neat form. When MC-51 is spent, only the chelated iron content of the solution will dictate the method of disposed. In most cases, it can be put directly into the local sewer system. Check with your local Municipality for any specific disposal requirements.
Q A If the steel has a coating, will the coating be damaged by using MC-51?
MC-51 will not damage any polymers, plastics, or coatings, and can even be used on painted surfaces without damaging most paints. MC-51 only attacks the rust. Two exceptions are cadmium (used in some plating materials) and zinc coatings, which can be removed with prolonged exposure to MC-51.
Q A Will MC-51 remove bluing and other oxide finishes?
MC-51 will remove these oxides very quickly with the Spray, Wipes, Soak, or Gel.
Q A Can MC-51 be used as a penetrant similar to WD-40?
MC-51 will act as a very effective penetrant. Simply spray or soak the rusted parts in MC-51. Not only will MC-51 loosen the rust, it will remove the rust and restore the part to its original condition.
Q A How many times can MC-51 be used?
The spray, wipes, and gel are designed for single application usage. The soak can be used over and over again until the effectiveness starts to wear off.
